Bradford White® TTW® Gas Water Heater, 40000 Btu/hr Heating, Liquid Propane Fuel, 1/2 in Gas Connection, 40 gal Tank, Pilot Ignition, Power Vent, 2 x 3 in Vent, 43 gph Recovery Rate, 0.68, 3/4 in NPT Water Connection, 150 psi Pressure, No Ultra Low NOx, 20 in Dia x 26-1/16 in D x 66-7/8 in H, Domestic
Our Power Vent (TTW®) models are power vented for positive exhaust. They offer greater installation flexibility with the ability to vent through a wall or roof, with either 2 or 3 in PVC, ABS or CPVC pipe. They offer an increased amount of hot water available at a usable temperature in less time than normal.
AHRI Certified|ANSI Z21.10.1-2014|ASHRAE 90.1b|CEC Listed|CSA 4.1-2014|CSA International (Formerly AGA/CGA)|CSA LLC - Low Lead Compliant|EnergyStar® Certified|Massachusetts Approved|NSF 372
Dimensions
20 in Dia x 26-1/16 in D x 66-7/8 in H
Domestic/Import
Domestic
Energy Factor
0.68
Fuel Type
Liquid Propane
Gas Connection
1/2 in
Heating Capacity
40000 Btu/hr
Ignition Type
Pilot
Pressure Rating
150 psi
Recovery Rate
43 gph
Tank Capacity
40 gal
Ultra Low NOx
No
Vent Size
2 x 3 in
Vent Type
Power
Water Connection
3/4 in NPT
Brand
Bradford White®
Country of Origin
US
Warranty
6 Years Limited on Tank/6 Years Limited on Component Parts
Bradford White® ICON System™: Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC)Enhanced performance: Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentialsAdvanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levelsIntelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshootingPower vent water heater: Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wallPowerful blower motor: Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situationsHorizontal and vertical venting: PVC, ABS or CPVCAdvanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heaterFlammable vapor sensor: Electronic sensor prevents burner operation if flammable vapors are detectedMaintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditionsSight window: Offers a view into the combustion chamber to observe the operation of the pilot and burnerFactory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tankVitraglas® liningInsulation system: Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidityWater connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connectionsFactory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generationLow restriction brass drain valve: Durable tamper proof designPower vent gas water heaterFVIR defender safety System®